RC SL 61 Series INK
Properties
Fast curing. Excellent flexibility. Opacity and heat formability.
PC, Treated PET film, A-PET film, PVC film, PVC sticker, Paper.
INTRODUCTIONS
RC SL 61 SERIES is UV curable ink with semi-gloss finish. The ink film is flexible and its curing is excellent despite of its high density. SL INK is recommended to be printed on thin film.
APPLICATIONS
Polycarbonate, treated PET film, A-PET film, vinyl film, vinyl stickers, paper
CHARACTERISTICS
1. Excellent curing. Ink film is flexible.
2. Cured ink film is vacuum-formable.
3. Highly opaque.
4. Excellent adhesion. Over-printability is good.
5. Fine patterns can be excellently reproduced. The reproducibility of halftone ink is superb.
6. The effect to the squeegee is less compared with other ink. Stable on the screen.
HOW TO USE
1. Stir well before use.
2. Add 61 REDUCER up to 10% to lower viscosity. When the addition exceeds 10%, add additive JAR-15 as well by 1-3%.(Both 42 Reducer and 47 Reducer can be added to this ink.)
3. Add 61-00 Matt Clear by 20-30% to increase viscosity. Additive JA-244 and JAR-20 can also make viscosity higher. Insufficient curing may happen to colored ink when the ink film becomes thick.
4. Insufficient curing may occur when silver or gold color is made using 61-00 Clear ink.
In this case, add additive JAR-15 to improve curability.
5. Standard curing conditions:
Mesh : 300-350 meshes/inch, Sol thickness : less than 10 microns
Metal halide lamps 80W/cm
Conveyor speed : 10m/min
Integral light : approx.150 mJ/cm²
Peak Power : 300mW/cm²
Notes : These conditions change depending on the substrate and color.
COVERAGE
70-80 ㎡/Kg
TYPE OF PACKING
1 kg PLASTIC CONTAINE
COLOR SHADES
Standard colors
white, opaque white, lemon yellow, yellow, deep yellow, orange, bright red, red, geranium, pink, violet, blue, deep blue, green, marine blue, black
Clear colors
61-00 clear, 61-00 matt clear, HFT matt clear, UB-1 matt clear, UB-2 matt clear
Halftone colors
– Standard type Halftone/lemon yellow, magenta, cyan, black..
– Matt type Halftone-N/ lemon yellow, magenta, cyan, black
PRECAUTIONS
1. Please refer to the literature “UV INK” for general precautions for UV ink.
2. Please refer to MSDS before use.
3. Be sure to do trial print before commercial run to confirm that the product fits the purposes.
PHYSICAL PROPERTIES
– Substrate : Polycarbonate(0.2mm sheet)
– Meshes : Polyester 350 meshes/inch
– Coating thickness : 10 microns
– Curing : One metal halide lamp 80W/cm
Conveyor speed – 10m/min. (Integral light : 150mJ/cm², Peak Power : 300mW/cm²)
| TEST ITEMS | TEST METHODS | RESULTS |
|---|---|---|
| Adhesion | Cross-hatch, tape-peeling test | 100/100, Passed |
| Hardness | JIS K-5400 8.4 Pencil hardness | B-HB |
| Bending resistance | JIS K-5400 8.1 | Excellent |
| Impact resistance | JIS K-5400 8.3 Du Pont Impact tester 1/2 inch, 300 grams, 20 cm |
Passed |
| Over-printability | Adhesion test with 3 colors | 100/100 Passed |
| Heat resistance | 70°C(158°F), 240 hours | Passed |
| Humidity resistance | 60°C(140°F), 95%RH, 240 hours | Passed |
| Coldness resistance | -20°C(-4°F), 240 hours | Passed |
| Water-proofness | Immersion in 40°C(104°F) water for 24 hours | Passed |
| Alcohol resistance | Rubbing test with 99.5% ethanol | Gloss decreased after 50 rubs |
| Weathering resistance | 400 hours by Sunshine-weather meter | Passed |
1. Weathering resistance depends on the color. Please refer to lightfastness chart before use.
2. Information given here is gained from our laboratory testing, and no firm guarantee is implied.
Applications Usage
PC, Treated PET film, A-PET film, PVC film, PVC sticker, Paper.