RC LP 47 SERIES
Properties
Fast curing. Flexibility. Low price.
PVC sticker, Rigid PVC, ABS, Treated PET
INTRODUCTIONS
RC LP 47 SERIES is gloss ink designed for general PVC. The price is reasonable. The ink film is flexible and curing is also good.
APPLICATIONS
PVC stickers, rigid PVC plates, PVC forms, treated PET, ABS, treated PE tubes
CHARACTERISTICS
1. Gloss finish. Reasonable price.
2. Flexible ink film.
3. Over-printability and post-print formability.
HOW TO USE
1. Ink is supplied in ready-to-use condition. Stir well before use.
2. Add 47-00 REDUCER up to 20% if it is necessary to lower viscosity.
3. Add MATT CLEAR or JA-244 to increase viscosity. Stir well after addition.
4. Add EXTENDER or CLEAR by approx.10% to shorten the curing due to the insufficient performance of the lamp or the properties of the substrate. Add JAR-1 by approx.10% to improve surface curing.
5. Standard curing conditions: (These conditions change depending on the substrate.)
One metal halide lamp 120W/cm, Distance from focus : 10 cm
Conveyor speed : 15-20 m/min (Integral light : approx.120-150 mJ/cm²)
Mesh : Polyester 270-300 meshes/inch
Thickness of sol : <10 microns (Excludes the case of textured surface)
6. Our VINYL CLEANING THINNER is recommended for washing up.
COLOR RANGE
COLORS
WHITE, OPAQUE WHITE, LEMON YELLOW, YELLOW, ORANGE, BRIGHT RED, RED, GERANIUM, PINK, VIOLET, DEEP BLUE, BLUE, MARINE BLUE, GREEN, BLACK
CLEAR
CLEAR, EXTENDER, OVER COAT CLEAR, MATT CLEAR, HFT MATT CLEAR, DP-1 CLEAR, UF-1 CLEAR, UB-1 MATT CLEAR, UB-2 MATT CLEAR, RL-N RELIEF CLEAR, TRANSPARENT CLEAR, TRANSPARENT OVER COAT CLEAR, TRANSPARENT MATT CLEAR
HALFTONE
LEMON YELLOW, MAGENTA, CYAN, BLACK, CLEAR
COVERAGE
Approx. 70-90 m²/kg
PRECAUTIONS
1. The viscosity and printability of the ink change depending on the temperature.
2. It is advised to avoid skin contact with the ink. In case of contact with skin, wash immediately with soap and water.
3. Any harmful materials such as heavy metal or N-Vinyl Pyrrolidone are not contained. Please refer to MSDS for the details.
4. Store the ink in a cool and dark place. Stir occasionally to keep stability when the ink is stored for a long time.
5. Stir well before use as de-foamer might be separated.
6. Be sure to do trial print before commercial run to confirm that the product fits the purposes.
PHYSICAL PROPERTIES
– Substrate : Rigid PVC sheet
– Meshes : Polyester 300 meshes/inch
– Curing : One metal halide lamp 120W/cm
– Conveyor speed : 15 m/min. (Integral light : 150 mJ/cm²)
| TEST ITEMS | TEST METHODS | RESULTS |
|---|---|---|
| Adhesion | Cross-hatch, tape-peeling test | 100/100, Pass |
| Hardness | Pencil hardness | F-H |
| Flexibility | Bending test (JIS K-5400 6-15) | Excellent |
| Over-printability | Adhesion test after 5-color-overprint | Pass |
| Alcohol resistance | Rubbing test with 500-gram-load with 99.5% ethanol. |
Slight color-fading |
| Warm water resistance | Immersion in water of 40°C(104°F) for 24 hours | Pass |
| Weathering resistance | Sunshine weather meter (400 hrs = 1 year) |
RED, YELLOW : 1 year-pass WHITE,BLUE,BLACK : 2 years-pass |
- Information given here is gained from our laboratory testing, and no firm guarantee is implied.
- Weathering resistance depends on the color. Please refer to lightfastness chart before use.
Applications Usage
PVC sticker, Rigid PVC, ABS, Treated PET