WIT INK

INTRODUCTIONS
WIT INK is one component of solvent based ink, developed to use Hydrographic or water transfer printing film such as a helmet. As a result of excellent flexibility, this ink can use without coating. 

APPLICATIONS
Helmet of Motorcycle (ABS, PC)
* < Printing Process>
Print on transfer printing paper → dry fully → dip the transfer printing paper in the water →take the transfer printing paper out →transfer printing film to the material → remove water → drying

CHARACTERISTICS

  • This can transfer printing without adhering level.
  • Due to flexible film, ink can use without coating.
  • Able to transfer printing to curve material.
  • The properties of non- silicon type ink can good coating properly.
  • Good gloss.

HOW TO USE
« STANDARD INK »
Dilute the ink with 10 -30 parts of PC THINNER (Fast Drying, Standard Drying, Slow Drying) before  print.  Use printing block about 100-200 meshes.
« OVERCOAT CLEAR »
Use CLEAR INK by dilute ink with 10 -30 parts of PC THINNER (Fast Drying, Standard Drying, Slow Drying) before print.  Use printing block about 100-200 meshes.

DRYING
« PC STANDARD DRYING THINNER 15%, 250 Meshes »
▪ Drying Condition – Normal temperature     15 minutes
                                                           40°c                        5 minutes

POT LIFE
There is not pot life.

HOW TO WASH UP THE PRINTING BLOCK
Use VINYL CLEANING THINNER.

COLORS & TYPE OF PACKING
1 kg metal can.

PRECAUTIONS

 ▪ This is the non-silicon type ink. If printing adhere the silicon material, it will be the cause of failed printing. Therefore, please be careful to handle printing materials.
▪ In the case of transfer printing to hard adhering materials, the properties of adhesion depend on the coating.
 ▪ When it must be the adhering level, 00 CLEAR is recommended for using.
 ▪ Please refer to MSDS before use.

 * The information may be updated or changed without notice.

Scroll to Top